Installation is relatively straightforward:
-
Fix the cassette box inside the jamb (minimum depth 20 mm) using the supplied screws. Don’t remove the protective light-blocking film
-
Insert the blind into the cassette brackets, securing both the control and idle ends
-
Test the blind, then clip the side channels into place and fix them using the provided U-card and screws
-
Add the bottom channel to complete the sealed system
-
Attach the cassette cover and, if you chose chain-drive, secure the chain with the supplied safety tensioner
We provide an expanded step-by-step PDF installation guide at the end of the installation section and you can also watch our Inside Fit video for a visual walk-through below
